Paver Contractors in Cotswold, NC

Pavers Installed Right the First Time

Professional paver installation that actually lasts, with proper base prep and attention to Charlotte’s unique soil conditions.

Professional Paver Installation Services

What You Get When It's Done Right

Your driveway won’t settle or crack after the first winter. That’s because we understand Charlotte’s clay soil and how it moves with freeze-thaw cycles.

You get pavers that stay level, joints that don’t separate, and edges that hold their line. No callbacks six months later asking why things are shifting.

Your property value increases immediately. More importantly, it stays increased because the installation holds up to daily use, weather, and time.

Cotswold Paver Installation Experts

We Know Charlotte Soil Conditions

Union Landscaping and Hardscape S Corp has been handling paver installations throughout the Charlotte area for years. We’re not the crew that learns on your property.

We know exactly how deep to excavate for Charlotte’s clay soil. We know which base materials work and which ones fail when the ground shifts.

You’re working with licensed, insured professionals who understand both residential and commercial paver installation requirements in North Carolina.

Our Paver Installation Process

Here's How We Handle Your Project

First, we excavate to the proper depth based on your soil conditions and intended use. This isn’t guesswork – we know exactly how deep to go for driveways versus patios.

Next comes base preparation with the right materials, properly compacted in lifts. This is where most paver failures happen, so we don’t rush this step.

Then we install your pavers with proper edge restraints and joint sand. We use mechanical compaction to set everything properly, not just hand tamping.

Finally, we clean up completely and walk you through maintenance basics. You’ll know exactly what to expect and how to keep your pavers looking great.

Ready to get started?

Explore More Services

About Union Landscaping and Hardscape

Get a Free Consultation

Complete Paver Installation Services

What's Included in Every Project

You get proper excavation, base preparation, and installation of your chosen pavers. We handle everything from driveway paver installation to patio and walkway projects.

We work with interlocking pavers, brick pavers, and natural stone options. Whether you need residential paver installation for your home or commercial paver work for your business, we have the equipment and experience.

Every project includes proper drainage considerations because standing water destroys paver installations. We also handle any necessary permits and ensure compliance with local requirements in Cotswold and surrounding Charlotte areas.

How long do properly installed pavers actually last?

Properly installed pavers can last 25-30 years or more with minimal maintenance. The key is proper base preparation – most paver failures happen because the base wasn’t done right, not because the pavers themselves failed. We excavate to the correct depth for your soil conditions, use appropriate base materials, and compact everything properly. This prevents settling, shifting, and cracking that you see with rushed installations. Individual pavers can be replaced if damaged, which means you never have to replace the entire surface like you would with concrete.

What's the difference between cheap and quality paver installation?

The difference is in the base preparation and materials used. Cheap installations skip steps – they don’t excavate deep enough, use inferior base materials, or don’t compact properly. This leads to settling, shifting, and edge failure within a few years. Quality installation means proper excavation depth, appropriate base materials for your soil type, mechanical compaction in lifts, and proper edge restraints. We also use quality joint sand and sealers when appropriate. The upfront cost difference is small compared to having to redo the entire project when cheap installation fails.

How do we handle Charlotte's clay soil for paver installation?

Charlotte’s clay soil expands and contracts with moisture changes, which can destroy paver installations if not handled properly. We excavate deeper than you might in other soil types and use specific base materials that provide stability and drainage. Proper drainage is critical – we ensure water moves away from the paver base rather than sitting in the clay. We also understand how different areas of your property may have different soil conditions and adjust our approach accordingly. This local knowledge prevents the settling and shifting problems that happen when contractors don’t understand our soil conditions.

Can you install pavers over existing concrete or asphalt?

In some cases, yes, but it depends on the condition of the existing surface and proper drainage considerations. The existing surface must be stable, properly sloped for drainage, and free from major cracks or settling. We evaluate each situation individually because cutting corners on base preparation leads to problems later. Sometimes it’s actually more cost-effective to remove the old surface and start fresh rather than trying to work around existing issues. We’ll give you an honest assessment of what will work long-term versus what might seem cheaper upfront but cause problems later.

What's the best time of year for paver installation in Charlotte?

Spring and fall are ideal for paver installation in Charlotte because temperatures are moderate and we typically have less extreme weather. However, we can work year-round except during freezing conditions or when the ground is saturated. Summer installations are possible but may require more careful scheduling around heat and afternoon storms. Winter work depends on ground conditions – frozen or saturated soil makes proper excavation and compaction difficult. We’ll be honest about timing and won’t start your project when conditions aren’t right for quality installation, even if it means waiting a few weeks.

How much does professional paver installation cost in Cotswold?

Paver installation costs vary based on the size of your project, paver material chosen, site conditions, and complexity of the design. Simple patio installations typically start around $15-20 per square foot, while complex driveway projects with premium materials can run $25-35 per square foot or more. The investment includes proper excavation, base preparation, materials, installation, and cleanup. We provide detailed written estimates that break down all costs so you understand exactly what you’re paying for. Remember that quality installation costs more upfront but saves money long-term by avoiding callbacks and premature replacement.

Local Resources

Cotswold, NC is located in Mecklenburg County in North Carolina State

Useful Links